Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
69
Chapter
5
Configure the Configurable Flowmeter Module
What This Chapter Contains
This chapter describes how to configure the ControlLogix® configurable
flowmeter module using the programming software.
You must configure your module upon installation. It will not work with the
ladder program until it has been configured.
Using This Chapter
This chapter is broken into two sections:
•
Overview of the Configuration Process
- Includes a detailed explanation
of how to perform each task mentioned in the overview
•
Examples of how to configure your configurable flowmeter module for
any of these operational modes:
- High Resolution Frequency mode
– Totalizer mode using the prover function
– Totalizer mode using the filler function
This chapter is intended to teach you how to configure the module for basic
operation in each of the modes mentioned above. You should be able to use the
building blocks learned in this chapter to write more detailed configuration for
your module in your specific application.
IMPORTANT
The examples offered in this chapter only list the tags that need to be
changed for specific operational modes. For a complete listing of
configuration, input and output tags, see Appendix B.
