Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
65
Chapter 4 Install the Configurable Flowmeter Module
Assembling the Removable
Terminal Block and Housing
1. Align the grooves at the bottom of the housing with the side edges of the
RTB.
2. Slide the RTB into the housing until it snaps into place.
Installing the Removable
Terminal Block on
the Module
Before installing the RTB, make certain:
•
field-side wiring of the RTB has been completed.
•
the RTB housing is snapped into place on the RTB.
•
the RTB housing door is closed.
•
the locking tab at the top of the module is unlocked.
1. Align the side, top and bottom RTB guides with the side, top and bottom
module guides.
Groove
Groove
Side edge of the RTB
Side edge of the RTB
Strain relief area
WARNING:
When you connect or disconnect the removable terminal block
(RTB) with field side power applied, an electrical arc can occur. This could
cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
Module top guide
RTB side guides
