Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 32
Get/Set Video Format
Description:
This command will get or set the current video mode of the Binloop. This
command determines internal clocks in the Binloop, which in turn determines the
available framerates for the reproducers. Choose NTSC for 29.97 or 59.94fps.
PAL for 25 or 50fps. FILM for 24 or 48fps. Note that you still must configure the
resolution and framerate of the individual reproducers.
Parameters:
x
= mode number:
0
= NTSC
1
= PAL
2
= FILM
Get Command:
VF
Response:
x
Example:
Command:
VF
Response:
0
Set Command:
xVF
Response:
R
Example:
Command:
0VF
Response:
R
Get/Set Synchronous Play Delay
Description:
This command configures the synchronous play delay of the Binloop
reproducers. By default, this delay is
60 SMPTE frames
, or around 2 seconds at
29.97fps, but this setting allows you to override that default if necessary. Be
warned that decreasing this delay too much will result in synchronization
problems. The reproducers must have adequate time to load the video or audio
clip before it is capable of starting playback.
Parameters:
nnn
is a
number between 0-127 that represents the S-Play delay setting
0
– Use Reproducer Default Delay (60 Frames)
1-127
– Delay (in frames)
Get Command:
SD
Response:
nnn
Set Command:
nnnSD
Response:
R
Example:
Set S-Play Delay to
16
frames:
16SD
Set S-Play Delay to the
Reproducer Default
:
0SD
