Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 19
Parallel Inputs
The following table lists the available inputs of the Binloop’s Parallel
control interface, as well as description of their functions:
Function
Contact
Closure
Pins
Voltage
Pins
Description
*Start
7(+),8(-)
Start SMPTE
*Pause
9(+),10(-)
Pause SMPTE at next SMPTE loop
point
*Stop
11(+),12(-) Stop SMPTE, Stop all reproducers.
*Mute Audio
13(+),14(-) Mute Audio on all reproducers
Play Group #1
20, GND**
Play and Loop clip #1 on Group #1
Play Group #2
21, GND**
Play and Loop clip #2 on Group #2
Play Group #3
22, GND**
Play and Loop clip #3 on Group #3
Play Group #4
23, GND**
Play and Loop clip #4 on Group #4
Play Group #5
24, GND**
Play and Loop clip #5 on Group #5
Play Group #6
25, GND**
Play and Loop clip #6 on Group #6
Play Group #7
26, GND**
Play and Loop clip #7 on Group #7
Play Group #8
27, GND**
Play and Loop clip #8 on Group #8
Reset SMPTE
28, GND**
Stop SMPTE
Idle SMPTE
29, GND**
Pause SMPTE immediately
Note: Pins not listed here or in the Parallel Outputs table should be
left unconnected.
*These functions are identical to the front-panel control buttons of the
Binloop.
**GND can be any one of the ground pins on the Binloop’s Parallel
Control Connector. This includes pins 16, 17, 18, and 19.
