Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 82
Control Card Jumpers
The following Controller cards have jumpers located on them that can
be used to change certain settings on the card itself.
DBAP5 Controller Revision B
JP1
is the video sync type jumper:
POS 1-2
= Blackburst
POS 2-3
= Composite Sync
W1
is the 75 ohm termination jumper for V-sync, and should be
installed.
JP2
,
JP3
, and
JP4
are used to switch the Show Control port between
RS232 and RS422
POS 1-2
= RS232
POS 2-3
= RS422
