Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 33
Search Clip
Description:
This command causes the Binloop to preload the specified video clip and then
pause on the first frame of the video. After this happens, the next
Play
command
causes the video file to start playing from the first frame onward.
Command:
nnnnaaaSE
Parameters:
nnnn
is an ASCII file number between 0-1023
aaa
is the address of the card(s) you want to process the command
Rxx
– Reproducer address between R1-R8
Gxx
– Group address between G1-G13
Fx
– 4K Group, F1 or F2
* - Wildcard address for all reproducers
Response:
R
Examples:
Search File 1 on Reproducer #2:
1R2SE
Search File 2 on Group #1:
2G1SE
Search File 150 on 4K Group #2
150F2SE
Search File 52 on All Reproducers:
52*SE
Play / Resume
Description:
This command will start playing a clip that was previously loaded by a Search
Clip command. This command will also resume playback when the reproducer
has been stilled or paused.
Command:
aaaPL
Parameters:
aaa
is the address of the card(s) you want to process the command
Rxx
– Reproducer address between R1-R8
Gxx
– Group address between G1-G13
Fx
– 4K Group, F1 or F2
* - Wildcard address for all reproducers
Response:
R
Example:
Search File 1 on 4K Group #2:
1F2SE
Play pre-searched file on 4K Group #2
F2PL
