Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 40
Set HD Video Format
Description:
This command configures the high-definition video format for the outputs of the
specified reproducer(s). If using the Binloop as a 4K player, set the desired 4K
group to 1080P for a total resolution of 3840x2160, or 2K for a total resolution of
4096x2160.
Command:
fffffaaaVO
Parameters:
fffff
is one of the following strings
2KP59
– 2K(2160x1080) @ 59.94fps
2KP50
– 2K(2160x1080) @ 50fps
2KP29
– 2K(2160x1080) @ 29.94fps
2KP23
– 2K(2160x1080) @ 23.976fps
1080P59
– 1080p @ 59.94fps
1080P50
– 1080p @ 50fps
1080P29
– 1080p @29.97fps
1080P23
– 1080p @23.976fps
720P59 –
720p @ 59.94fps
720P50 –
720p @ 50fps
aaa
is the address of the card(s) you want to process the command
Rxx
– Reproducer address between R1-R8
Gxx
– Group address between G1-G13
Fx
– 4K Group, F1 or F2
* - Wildcard address for all reproducers
Response:
R
Example:
Set Reproducer #1 to 1080p @ 59.94fps:
1080P59R1VO
Set 4K Group #2 to 3840x2160 @ 59.94fps:
1080P59F2VO
Get Reproducer Firmware Version
Description:
This command requests the firmware version of the specified reproducer. If the
specified reproducer is not installed in the Binloop, there will be no response.
Command:
aaa?V
Parameters:
aaa
is the address of the card(s) you want to process the command
Rxx
– Reproducer address between R1-R8
Response:
REPRO-2KU Vx.xx
Example:
Request firmware version of Reproducer #1:
R1?V
Example Responses: Reproducer with V1.00:
REPRO-2KU V1.00
