Alcorn McBride A/V Binloop Uncompressed User’s Manual
Page 80
SMPTE
The SMPTE connector provides both an input and output for the SMPTE
interface of the Binloop. The balanced input is 600 ohm transformer-
isolated and will accept levels between 1- 5 Vpp. The balanced output
level defaults to 0dBV into 150 ohms, but can be adjusted between 0-
4dBV using the front-panel menu of the Binloop. For backward
compatibility with previous Binloop systems, an alternate V-Sync input is
also provided on this connector.
Pin
Signal
1
S
2
SMPTEIN -
3
N/C
4
VSYNCIN
5
GND
6
N/C
7
N/C
8
SMPTEOUT-
9
S
