Albrecht AE 230 H Manual Download Page 8

Page: 8 / 76

Band Plan 3

Frequency Rage (MHz)

Mode

Step (kHz)

25.0000 - 29.9950

30.0000 - 79.9937

6.25

80.0000 - 82.9937

6.25

83.0000 - 87.2937

6.25

108.0000 - 136.9875
108.0000 - 136.9916

12.5 / 8.33
Selectable

137.0000 - 137.9950

138.0000 - 157.9937

6.25

158.0000 - 160.5937

6.25

160.6000 - 162.5937

6.25

162.6000 - 173.9937

6.25

216.0000 - 224.9950

400.0000 - 405.9875

12.5

406.0000 - 439.9937

6.25

440.0000 - 465.9937

6.25

466.0000 - 469.9937

6.25

470.0000 - 512.0000

6.25

806.0000 - 960.0000

12.5

1240.0000 - 1300.0000

12.5

Feature Highlights

General

Close Call

RF Capture Technology

- you can set the

scanner so it detects and provides information about nearby
radio transmissions. See “Using the Close Call Feature” on
Page

60 for more information.

Dynamically Allocated Channel Memory

– your scanner’s

memory is organized so that it more closely matches how
radio systems actually work, making it easier to program
and use your scanner and determine how much memory
you have used and how much you have left.

Preprogrammed Races

- your scanner is preprogrammed

with Formula 1 races.

Quick Race Programming -

lets you quickly and easily

enter information about a specific race.

Quick Keys

– You can set the scanner so you can select a

race or systems and groups by pressing a single key. This
makes it easy to listen to or quickly lock out those systems

Summary of Contents for AE 230 H













































































Search results

Summary of Contents for AE 230 H

Reviews:

Albrecht AE 230 H, Manual, Page: 8 / 76

Search results

Summary of Contents for AE 230 H

Reviews: