30
Holding On a Channel
To hold on a channel, press
Hold
while the channel is active.
To select a different channel, rotate the scroll control. If you
scroll past the beginning or end of the current system, the
scanner selects channels in the previous or next system.
To resume scanning, press
Scan
.
Note:
You can select any channel (locked or unlocked).
Quick-Storing Channels
•
Hold on an existing channel in any system.
•
Enter the frequency you want to store.
•
To quick-store the channel, press
E
. Otherwise,
press
No
.
If you enter a frequency then press
E
, the scanner stores it
in the
QCK SAVE GRP
group in a system called
QCK
SAVE CNV SYS
. These are created if they do not exist.
Then, the scanner prompts you to save other channel
settings.
If you pressed
No
in the last step, the scanner prompts you
to select the system and the group where you want to store
the frequency.
Quickly Recalling Channels
•
Press
Hold
to hold on any channel.
•
Press
+
Rcl
. The scanner prompts you to
select the system where the channel is stored.
•
Rotate the scroll control to select the system, then
press
E
. The scanner prompts you to select the
channel group where the channel is stored.
•
Rotate the scroll control to select the group, then
press
E
.
If you selected a conventional system, the scanner prompts
you to select a channel. Rotate the scroll control to select
the channel, then press
E
to hold on that channel.
Otherwise, if you selected a racing system, the scanner
automatically selects an active channel from the car group
and holds on that group.
