53
SET ATTENUATOR
E
This setting controls whether the scanner attenuates signals
on this channel. Select your setting, then press
E
.
ON
- the channel is attenuated by about 18 dB.
OFF
- the channel is not attenuated.
Notes:
•
The default setting is
OFF
.
•
You can also toggle this setting by holding on the
channel and pressing
and
E
.
Setting the Frequency Step
PROGRAM SYSTEM
E
Select the system
E
EDIT GROUP
E
Select the group
E
EDIT CHANNEL
E
Select the channel
E
SET STEP
E
This setting selects the frequency step used for setting the
channel's. Select your setting, then press
E
.
AUTO
the step is based on the band (see the table at
the front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 8.33 kHz, 10.0 kHz , 12.5
kHz , 15.0 kHz , 20.0 kHz , 25.0 kHz , 50.0 kHz , 100.0
kHz
- The scanner uses the selected step.
Note:
The scanner defaults to
Auto
.
Setting Channel Lockout
PROGRAM SYSTEM
E
Select the system
E
EDIT GROUP
E
Select the group
E
EDIT CHANNEL
E
Select the channel
E
SET LOCKOUT
E
This setting determines whether the scanner will scan this
channel when its system and group are enabled. Select
your setting, then press
E
.
