38
Quickly Programming Racing Systems
You can use the menu system to program a racing system
(see “Manually Programming Racing Systems”). Or you can
follow the onscreen prompts as described in this section to
quickly program your scanner.
These prompts are designed to help you quickly enter a new
race from a frequency list purchased at the track (if the
system is not already preprogrammed into your scanner).
When you complete Steps 5 and 6, almost all cars will use
the default settings for the other steps.
1. While scanning, press
0
. Then rotate the scroll control to
select NEW RACE, then press
E
.
2. Enter the name of the race, then press
E
.
3. Enter the first car number (up to 3 digits),
then press
E
.
4. Enter the first driver name (up to 12
characters), then press
E
.
5. Enter the driver’s frequency, then press
E
.
6. Set the CTCSS/DCS code, then press
E
.
