39
7. Press
E
to enter advanced options
(Steps 8-11) or press
to skip to Step 12.
8. Set the modulation type (AUTO is almost
always the correct choice), then press
E
.
9. Set the attenuator (turn it on to eliminate
interference from other sources), then press
E
.
10. Set the channel priority (turn it on if you want
the scanner to interrupt operation every few
seconds to check for transmissions by this
driver), then press
E
.
11. Set alert (turn it on if you want the scanner
to sound a special alert when this car
transmits), then press
E
.
12. If you have another frequency to enter for
this driver, press
E
then repeat from Step
5. Otherwise, press
No
.
