40
13. To enter another car in this race, press
E
then
repeat from Step 3. Otherwise, press
No
.
14. When you finish, press
Scan
to begin scanning the race.
Manually Programming Racing Systems
PROGRAM SYSTEM
E
NEW SYSTEM
E
RACING
E
CONFIRM?
E
The scanner creates an empty racing system, with a default
name of
SYSTEM INN R. NNN
increments as
you add new systems. R indicates that this is a racing
system.
Refer to the appropriate chapters to set system-wide
options:
• See “Editing the System Name” (p.40)
• See “Setting Group Lockout” (p.45)
• See “Setting the System Hold Time” (p.46)
• See “Setting the Channel Delay Time”
• See “Setting Data Skip” (p.47)
• See “Editing the Car” (p.40)
• See “Deleting Systems” (p.47)
• See “Copying Systems” (p.47)
Editing the Car
PROGRAM SYSTEM
E
Select the system
E
EDIT CAR
E
Select the car
E
Follow these steps to enter the car options.
Rotate the scroll control to select one of the following
