56
•
the search menu.
CTCSS/DCS Search
CTCSS/DCS Search lets you search for
CTCSS
or
DCS
tones when it finds an active frequency in S
earch
and
Close Call
modes. You can identify up to 50 CTCSS tones
and 104 DCS codes.
Turning this option on lets the scanner search for CTCSS/
DCS tones. If the scanner detects the tone, it displays the
tone’s frequency and DCS code.
1. Press
then turn the scroll control until
SRCH/CLOCALL OPT appears. Then press
E
.
One of the search feature options appear.
2. Turn the scroll control until CTCSS/DCS SEARCH
appears, then press
E
to select it.
3. Turn the scroll control until ON appears to turn on
CTCSS/DCS search or until OFF appears to turn it
off, then press
E
.
Custom Search
Custom Search lets you program and search 10 custom
search ranges. You can search any of these ranges
simultaneously and select each custom search range you
set. During custom search, the scanner searches starting
with the lowest frequency in the search range you select to
the highest frequency in the range.
Notes:
•
Search ranges are preset. See “Editing a Custom
Search Range” to change the range.
•
You cannot turn off all custom search ranges.
1. Press
then turn the scroll control until
SEARCH FOR
... appears, then press
E
.
Or press
+
Scan/ Srch
, then select
No
.
One of the search feature options appear.
2. Turn the scroll control until CUSTOM SEARCH
appears, then press
E
to select it.
The scanner starts custom search of the custom search
range you selected, stopping on any transmission it finds
and displaying the frequency. Turn the scroll control to
change the search direction. An arrow appears, showing the
current search direction.
