62
•
CLOSE CALL ONLY
: Lets you set the scanner only for
Close Call searching. The scanner does not scan
frequencies or channels when this option is turned on.
To select this option, press
E
.
•
CC AUTO STORE
: Lets you select whether the
scanner automatically stores Close Call hits into
channels. If you turn this option on, the scanner
starts Close Call mode and stores any Close Call
hits, up to the maximum you specified in the Max
Auto Store setting. If the scanner stores more hits
than this setting, it stops Autostore operation.
Turn the scroll control to display an option, then
press
E
.
• SET CC MODE: Lets you select the Close Call
mode. If you turn this option on (CC DND, CC
PRI), the scanner sets itself to its Close Call
settings about once every 2 seconds. Turn the
scroll control to display an option, then press
E
.
You can also toggle this setting by pressing
then
.
Notes:
•
CC DND
- Close Call does not work while
monitoring a transmission.
•
CC PRI
- Close Call works even if there is a
transmission.
•
SET CC OVERRIDE
: Lets you select how the
Close Call feature works with other scanning
activities.
•
If you turn this option off, when the scanner
detects a Close Call signal,
CC FOUND!
and
E
TO LISTEN
appear for about 3 seconds. Press
E
when this appears to jump to and hold on the
frequency.
•
If this option is turned on, the scanner overrides
the current channel and goes to the Close Call hit.
•
The scanner displays
CC FOUND! PRESS ANY
KEY
.
•
When you press a key, the frequency is displayed.
•
Turn the scroll control to display an option, then
press
E
.
•
SET CC ALERT:
Lets you select how the scanner
alerts you when it receives a Close Call signal.
You can select any of the following options.
•
BEEP+LIGHT
(the scanner beeps and the
backlight turns on when it receives a Close Call
signal)
