35
CLONE SLAVE PRESS SCAN KEY
When you are ready to clone the scanner, press
Scan
on
the slave scanner first, then on the master scanner.
The master scanner checks the connection between the two
scanners, then transfers its data to the slave scanner.
When the transfer is complete, Complete appears on both
scanners. If the transfer did not work, Error appears on the
master scanner.
Using the Menu
The scanner’s menu lets you select options that let you set
up and use the scanner.
To use the menu, press
on the left side of the scanner.
In most cases, the current menu position appears on the
upper line of the menu. Menu items and a place to input
information appear on the lower line of the menu. To select
a menu item, turn the scroll control on top bof the scanner
clockwise or counterclockwise. When the menu item you
want to select appears, press
E
or press the scroll control
down to select it. To back up a level or return to the previous
level, press
. To exit the menu mode, press
.
This table shows the available menu options and where you
can find more information about how to use them.
Menu Item
Lets
You ...
See
Under…
Set up
the
scanner’s
scan
options.
Programming
Radio
Systems
Set up
the
scanner’s
Close
Call
option.
Using the
Close Call
Feature
Set up
the
scanner’s
search
option.
Searching
and Storing
