52
with the signal. The scanner then
prompts you to scroll to the desired
tone.
SET LOCKOUT
the scanner does not stop on the
channel if the tone you select is
present. The scanner prompts you
to select a CTCSS or DCS tone.
Notes:
•
The default setting is OFF.
•
See “What is CTCSS/DCS?” for a complete list of
CTCSS and DCS tones.
Setting Channel Modulation
PROGRAM SYSTEM
E
Select the system
E
EDIT GROUP
E
Select the group
E
EDIT CHANNEL
E
Select the channel
E
SET MODULATION
E
This setting controls the demodulation method used for the
channel. Select your setting, then press
E
.
AUTO
the scanner uses the default modulation for the
frequency (see the table at the front of the
manual).
AM
the scanner uses AM (amplitude modulation) for
the frequency.
FM
the scanner uses FM (frequency modulation) for
the frequency.
NFM
the scanner uses narrow band FM for the
frequency.
Note:
The default setting is AUTO.
Setting Channel Attenuation
PROGRAM SYSTEM
E
Select the system
E
EDIT GROUP
E
Select the group
E
EDIT CHANNEL
E
Select the channel
E
