65
you set, it stops the auto-store operation.
Setting the Modulation Type
SRCH/CLOCALL OPT
E
SET MODULATION
E
This setting controls the modulation type used for quick
search and Close Call operations.
•
Select your setting, then press
E
.
AUTO
Uses the default setting for the current frequency
AM
Uses AM (amplitude modulation)
FM
Uses FM (frequency modulation)
NFM
Uses narrow band FM
Setting Attenuation
SRCH/CLOCALL OPT
E
SET ATTENUATOR
E
This setting controls the attenuator for quick search, service
search and Close Call operation.
•
Select your setting, then press
E
.
OFF
The attenuator is off.
ON
Reception is attenuated by about 18 dB.
Note:
Turn on this setting if you are near other strong signal
sources. Using the attenuator sometimes helps to reduce
interference and desensitization that strong signals create.
Setting Data Skip
SRCH/CLOCALL OPT
E
SET DATA SKIP
E
This setting controls how the scanner behaves when it
detects a constant-level transmission during quick search or
Close Call operation.
•
Select your setting, then press
E
.
OFF
The scanner remains on the transmission until it ends.
ON
The scanner quickly resumes searching or Close Call
operation.
Notes:
