manualshive.com logo in svg

Albrecht AE 230 H, Manual, Page: 67 / 76

Share
Download
Albrecht AE 230 H Manual Download Page 67

 

67

• 

entry tone for that key entry. 

 
Location 
 

• 

Do not use the scanner in high-moisture 
environments such as the kitchen or bathroom. 

• 

Avoid placing the unit in direct sunlight or near 
heating elements or vents. 

• 

If the scanner receives strong interference or 
electrical noise, move it or its antenna away from 
the source of the noise.   

• 

If possible, a higher elevation might provide better 
reception. 

• 

Also try changing the height or angle of the 
antenna. 

 
Cleaning 

Disconnect the power to the unit before cleaning. Clean the 
outside of the scanner with a mild detergent. 
To prevent scratches, do not use abrasive cleaners or 
solvents. Be careful not to rub the LCD window. Do not use 
excessive amounts of water. 

 
 
Repairs 

Do not attempt any repair. The scanner contains no user 
serviceable parts. Please follow the trouble shooting tables 
on the next page, before you return the scanner to the 
distributor. In many cases malfunctions can be solved 
easily.  
In case of a real defect, please contact your distributor at 
first. If the unit is under warranty, your distributor will either 
replace the unit, repair it or send it to an authorized repair 
station. If the distributor cannot be reached, please call our 
repair dept. You will find all contact addresses on the last 
page of this manual.   

 
 

Summary of Contents for AE 230 H













































































Reviews:

No comments