Scholar V Installation & Startup Manual 07/2016 New
46
APPENDIX F - OUTDOOR LOUVER/COLLAR INSTALLATION
1.01 TOOLS/FIELD FURNISHED SUPPLIES
WARNING
TO AVOID PERSONAL INJURY, ADEQUATE PROTECTIVE CLOTHING MUST BE WORN
AND PRECAUTIONS IN HANDLING AND INSTALLING THIS EQUIPMENT MUST BE
PRACTICED AT ALL TIMES.
• Power Drill/Driver and Extension
• T25 TORX Bits
• Sealant Caulk (tube)
• Caulking Applicator
• Ladder (as appropriate)
• Masonry Penetrating Fasteners (6 per collar)
• Scribe/punch
1.02 INSPECTION/UNPACKING/HANDLING
Louver/collar assemblies, louvers and collars are shipped to the job site in corrugated
containers. Do not stack these containers. Louvers and collars are to be handled as
fragile items.
IMPORTANT
IMMEDIATELY UPON RECEIPT, INSPECT THIS EQUIPMENT TO DETERMINE VISIBLE
AND CONCEALED DAMAGE. ALL DAMAGE MUST BE REPORTED TO THE FREIGHT
CARRIER WITHIN 15 DAYS, OF THE FREIGHT CARRIER’S FORM
The following louver/collar assemblies, louvers and collars are suitable for all Scholar V
units.
Part Number
Description
81161
Clear anodized louver/collar assembly
81162
Dark bronze louver/collar assembly
To minimize damage, remove the louver and louver parts from the corrugated container
just prior to installation. Retain the bag of screws and caps for installation of the louver.
WARNING
THIS EQUIPMENT MUST BE INSTALLED IN CONFORMANCE WITH ALL APPLICABLE
LOCAL AND NATIONAL ELECTRICAL, PLUMBING AND BUILDING CODES.
THIS EQUIPMENT SHOULD BE INSTALLED AND SERVICED ONLY BY A TRAINED
PROFESSIONAL HVAC SERVICE PERSON.
