5
Scholar V Installation & Startup Manual 07/2016 New
WARNING
DO NOT STACK THE UNIT OR ANY ACCESSORIES ON TOP OF ONE ANOTHER.
THE UNITS SHOULD ALWAYS REMAIN IN THE UPRIGHT POSITION WHEN BEING
SHIPPED, STORED, HANDLED OR INSTALLED.
DO NOT STORE THE UNIT OR ACCESSORIES IN OUTDOOR WEATHER CONDITIONS.
WARNING
THE SCHOLAR V UNIT WEIGHS IN EXCESS OF 1,000 LBS. WHEN MOVING THE
UNIT, SUFFICIENT MANPOWER AND MECHANICAL EQUIPMENT MUST BE USED
TO PREVENT DAMAGE TO THE UNIT AND INJURY TO PEOPLE. TO FACILITATE
MOVING THE SCHOLAR V UNIT, IT MAY BE NECESSARY TO LAY THE UNIT ON ITS
SIDE ON DOLLIES. IF THIS IS REQUIRED, USE TWO DOLLIES AND PLACE THE UNIT
ON ITS RIGHT SIDE (WHEN FACING THE SCHOLAR V UNIT). THE UNIT SHOULD
NOT REMAIN IN THIS POSITION ANY LONGER THAN REQUIRED FOR THE ACTUAL
MOVING PROCESS. IF THE SCHOLAR V UNIT HAS BEEN PLACED ON ITS SIDE, DO
NOT ATTEMPT TO START THE UNIT UNTIL THE UNIT HAS BEEN UPRIGHT FOR AT
LEAST 24 HOURS.
C.
Note the unit identification label is located on the right side cabinet panel at the lower
front corner. The identification label has the model and serial number on it and the
type of refrigerant and amount of refrigerant charge.
IMPORTANT
WHEN THE HEAT PUMP OR AIR CONDITIONER IS INSTALLED, MODEL NUMBER
AND SERIAL NUMBERS ARE TO BE RECORDED ON THE COVER OF THIS MANUAL
AND MAINTAINED IN A LOCATION FOR IMMEDIATE ACCESS, WHEN REQUESTING
FURTHER INFORMATION CONCERNING THIS EQUIPMENT.
Serial Number Date Code
A = January
E = May
J = September
D = 2014
H = 2018
B = February F = June
K = October
E = 2015
I = 2019
C = March
G = July
L = November
F = 2016
J = 2020
D = April
H = August
M = December
G = 2017
K = 2021
