Scholar V Installation & Startup Manual 07/2016 New
10
Operating Mode Read-Out
This box shows the mode that the unit is running in.
Forward
Advances to the next screen
Blower Auto
Press this to run the indoor blower only when a cooling or heating function is
required. The selection you make is shown in the box below.
Blower ON
Press this to run the indoor blower continually. The selection you make is shown in
the box below.
Blower On/Auto Read-Out
This box shows which blower operation technique is being used.
B. Temperature Screen
The next screen is the Temperature screen and shows several important
temperature values, as well as the compressor and blower control voltages
Supply Air
This is the real-time temperature of the air coming out of the unit.
Outside Air
This is the real-time temperature of the ambient outside air.
Outside Coil #1
This is the temperature read by a thermocouple buried in the feeder tubes of Outside
Coil #1.
Outside Coil #2
This is the temperature read by a thermocouple buried in the feeder tubes of Outside
Coil #2.
