13
Scholar V Installation & Startup Manual 07/2016 New
1.05 OPTIONAL CONTROLS
A. All units have the following control options available.
The
motorized fresh air damper with PowerVent and GreenWheel
®
ERV
ventilation options can be equipped with an exhaust fan air speed control, which
controls the ventilation exhaust blower independent of the fresh air intake blower.
1.06 LOCATION SELECTION AND PREPARATION
WARNING
THE SCHOLAR V HEAT PUMP AND AIR CONDITIONER MUST BE INSTALLED IN
CONFORMANCE WITH ALL APPLICABLE LOCAL AND NATIONAL ELECTRICAL,
PLUMBING AND BUILDING CODES.
A. The Scholar V heat pump and air conditioner must be installed on an outside wall for
access to outside air. The wall opening dimensions are shown in Figure 2. It must
not interfere with any windows or doors to the outside. The outdoor air path must
not be impeded by shrubbery or other obstructions. Do not locate the Scholar V
heat pump or air conditioner where noxious fumes or gas can be drawn in from the
outdoor air and introduced in the classroom.
The Scholar V heat pump or air conditioner must be installed on a hard, level,
smooth surface such as concrete, wood or tile. Do not install the unit on a carpeted
surface. Do not locate either side of the Scholar within 12” from a wall. The front
doors swing open to allow access to all components. Do not put anything immovable
in front of the Scholar V unit.
To remove carpet from where the “footprint” of the unit will be when installed,
carefully measure, cut and remove carpet from an area based on the dimensions
of the Scholar V cabinet as described in Figure 5; and allowing for any offset or
standoff from the finished interior surface of the wall.
Prior to installation of the Scholar V heat pump or air conditioner, provisions are to
be made for the following, as appropriate.
