11
Scholar V Installation & Startup Manual 07/2016 New
Room Temperature
This is the real-time temperature being transmitted by the temperature transmitter
located in the inlet to the evaporator coil.
Room RH
This is the real time relative humidity being transmitted by the RH transmitter located
in the inlet to the evaporator coil.
Forward
Press this button to go forward one screen.
Back
Press this button to go back one screen.
Back to Main
Press this button to go back to the main screen.
Compressor Volts
This box shows the speed control voltage being sent to the compressor.
Blower Volts
This box shows the speed control voltage being sent to the indoor blower.
C. Set-Points Screen
The Set-Points Screen is where the desired room conditions are set.
Cooling Set-Point
In the Cooling Mode or Auto Cool/Heat Mode, this is the user adjustable temperature
the unit runs to try and achieve while cooling the space.
Heating Set-Point (manual)
In the Heating Mode (manual, not Auto Cool/Heat), this is the user adjustable
temperature the unit runs to try to achieve while heating the space.
