Scholar V Installation & Startup Manual 07/2016 New
44
APPENDIX E - WALL BRACKET INSTALLATION
1.01 TOOLS/FIELD FURNISHED SUPPLIES
WARNING
TO AVOID PERSONAL INJURY, ADEQUATE PROTECTIVE CLOTHING MUST BE WORN
AND PRECAUTIONS IN HANDLING AND INSTALLING THIS EQUIPMENT MUST BE
PRACTICED AT ALL TIMES.
• Power Drill/Driver and Extension
• Tape Measure
• Bits for Wall Anchors, Field Supplied Sheet Metal Screws
• Masonry Penetrating Wall Anchors (4)
• #10 x 1/2” Self-Tapping Sheet Metal Screws (4)
• Ladder (as appropriate)
• File for Deburring Field Cut Metal Edges
1.02 INSPECTION/UNPACKING/HANDLING
Wall brackets are shipped to the job site in a corrugated container. The wall brackets
are universal and are adaptable to any model Scholar V heat pump or air conditioner.
The wall brackets provide additional means of securing the Scholar V heat pump where
deemed necessary by the specifier. The wall brackets can be applied to any cabinet
with a position of flush with the finished inside surface of the wall. Brackets are covered
with a protective film on the exposed painted surface. Leave film on surface to protect
against damage. Remove film when brackets are installed and construction has been
completed.
IMPORTANT
IMMEDIATELY UPON RECEIPT, INSPECT THIS EQUIPMENT TO DETERMINE VISIBLE
AND CONCEALED DAMAGE. ALL DAMAGE MUST BE REPORTED TO THE FREIGHT
CARRIER WITHIN 15 DAYS, ON THE FREIGHT CARRIER’S FORM.
1.03 PREPARATION OF SCHOLAR V HEAT PUMP OR AIR CONDITIONER FOR WALL
BRACKET INSTALLATION
The Scholar V heat pump and air conditioner and plenum (as appropriate) must be
installed, with the floor fasteners in place and the outside grille installed, to ensure the
fixed location of the system prior to installation of the wall brackets. Check the cabinet
for vertical plumb and parallelism to the inside of the finished wall prior to installing the
wall brackets.