23
ASSEMBLE INSTRUCTION
Step 1:
Remove all packaging and labels
before installation. Note: The machine
must be installed by 2 or more people.
Place the main frame on a flat and
stable floor. Raise the stand tube, and
fasten them to the frame with 2pcs
M8x20 and 2pcs M8x60 with washers.
Step 2:
One person holds the panel in place, the
other uses 2 M8x20 screws and washers
to secure the panel to the frame. Then
check the connection of the signal.
Step 3
:
Put the stand tube cover, and fasten them
with 2pcs ST4X16.
Step 4
:
Fasten the U-pipe to stand tube with 8pcs
M8x20 with washers.
Fasten the function frame to U-pipe with
2pcs M8x75 with washers.
Uninstall
3pcs
M8
screws
under
massager, put massager on function frame
and fasten it with 3pcs M8 screws.
Put safety key on computer and turn on
power, then can use the machine now.
