32
After few minutes no-load rotation, the deviation can not be automatically restored. If not recover,
may adjust it with the 6mm hex key in the Tool Kit, to circle for a quarter of a gradual adjustment.
See the figure below:
If deviate to the left, then adjust the screw on the left side clockwise or the screw on the right side
anticlockwise.
If deviate to the right, then adjust the screw on the right side clockwise or the screw on the left
side anticlockwise.
The running belt deviation is not within the warranty scope, mainly maintenance and adjusts
according to the users' manual by the users. Once your discover it, adjust it back in time, or else, it
will seriously damage the running belt.
Tighten the running belt
You may need to adjust your treadmill to your individual needs. But after using for a period of
time, due to the body weight of the user, the tension of the running belt may change from the
default setting. If you notice that the running belt is loose, you need to readjust the running belt
and roller. Please do not adjust it too tight, this can put a lot of pressure on the motor and will
damage the motor, running belt and roller.
Adjustment of the moving belt
If the moving belt becomes loose after using it for a period of time, you need to:
(1) Open the engine cover.
(2) Use a 6mm wrench to turn the adjusting bolt clockwise.
Repeat this procedure until the moving belt is no longer loose.
如果跑
带左偏
,
则顺时针调节左
边螺丝或逆时针调节右边螺丝
如果跑
带右偏
,
则顺时针调节右
边螺丝或逆时针调节左边螺丝
If deviate to the left, then adjust the
screw on the left side clockwise or
the screw on the right side
anticlockwise..
If deviate to the right, then adjust
the screw on the right side
clockwise or the screw on the left
side anticlockwise.
