Aibot X6 V2, Operation
23
Replace propellers
Always use the provided torque wrench to fasten the propeller screw nuts.
1) Make sure that the batteries are disconnected.
2) Grab and hold the propeller with one hand.
3) Loosen the screw nut with the provided torque wrench with your other
hand.
4) Dismount the old propeller and put a new propeller onto the drive shaft.
5) Make sure, that the propeller does not cover the airflow inlets of the
motor.
6) Loosely screw on the nuts by hand.
7) Grab and hold the propeller with one hand.
8) Fasten the screw nut with the provided torque wrench with your other
hand.
Repeat the previous steps for all other propellers you want to replace.
Check propellers
To check correct mounting of the propellers, follow the steps below.
Always use the provided torque wrench to fasten the propeller screw
nuts.
1) Make sure that the batteries are disconnected.
2) Grab and hold the propeller with one hand.
3) With your other hand fasten the screw nut with the provided torque
wrench.
Repeat the previous steps for all 6 propellers.
