Aibot X6 V2, Operation
25
Mounting the
telemetry antenna
To mount the telemetry antenna, follow the steps below:
1) Rotate the battery cover anticlockwise. Lift the battery cover to open the
battery compartment.
2) Take out the telemetry antenna.
3) Reattach the battery cover. Rotate the battery cover clockwise to close the
battery compartment.
4) Attach the telemetry antenna at the designated threaded socket between
the propellers on the bottom of the Aibot X6 V2.
5) Tighten the antenna by rotating it clockwise.
3.1.5
Preparation of the launch site
Requirements
The takeoff and landing area must meet the following requirements:
•
The takeoff site has to be a flat and hard surface area. Maximum allowed
slope for takeoff is 15°.
•
All vegetation, for example lawn, must be new-mown.
•
The area must be free from any obstacles.
•
Secure the takeoff site with a safety band or banner. For safety reasons,
make sure that only authorized staff have access.
•
Consider the wind direction, emergency landing field, mission field and the
whole environment. Make sure you can finish your mission safely without
being a hazard for any people, buildings, animals or yourself.
•
If possible, consider the position of the sun when choosing the position of
the operator. Make sure that no glare will occur during the mission.
