Agrio ALKA 2500, Instructions For Use Manual

Page: 40 / 104

www.agrio.cz
info@agrio.cz 40
9.3.4 Rinsing the Ecomixer
- After the chemicals are mixed, turn the valve to "Ecomixer rinse" (open the valve just enough
to prevent the water from splashing or spraying) and rinse the interior walls of the Ecomixer;
if a rinse pistol is mounted, it can be used to flush the remaining chemicals.
- It is also possible to drain the liquid by opening the valve.
9.3.5 Canister rinse nozzle
After emptying the canisters with pesticides, the canister must be rinsed using the rinse nozzle
in the Ecomixer.
-
Set the empty canister so that the hole is in the rinsing nozzle.
- Open the valve slightly (high pressure rinsing is not optimal) so that water pressure rinses out
the inside of the canister.
- For small canisters with small holes, interrupt the washing after a short time, let the water
flow out of the tank, and then flush again.
- Let the washed canister drain into the Ecomixer.
- Close the valve for the canister rinse.
- Open the valve for the Ecomixer rinse.
- During the entire operation, the valve can be open for suctioning out the Ecomixer.
9.4 Adding pesticides into the tank through the main hole in the tank
Attention!
If the chemicals are to be filled through the main hole in the tank, step only on the ladder and
service platform!
A filter basket must be set inside the tank hole.
9.5 Mixing
The sprayer comes standardly equipped with one hydraulic mixer.
The injector nozzles inserted in the bottom along the entire length of the tank ensure rapid and
efficient mixing.
The main mixing process is intense and uses the complete power of the pump.
9.5.1 Mixing with maximum power
Mixing with a single hydraulic mixer.
-
The valve must be set to mixer.
- Switch on the pump.