Agrio ALKA 2500, Instructions For Use Manual

Page: 61 / 104

www.agrio.cz
info@agrio.cz 61
Operation:
Before beginning work, fill the foam container (1 Figure 15/1) with foam and water.
This requires first switching off the marker (7 Figure 6/1) to release the pressure in the vessel.
Attention!
The rest of the foam can leak out! Only afterwards, release the clamp (3 Figure 15/1), loosen the
cover (2 Figure 15/1) and remove it.
Only afterwards, add the clean water, add the foaming agent (2 Figure 15/1), and close it tightly.
The switch (7 Figure 6/1) controls the right or left side separately and switches the foaming on
and off.
The regulator (8 Fig. 6/1) controls the dosing (density and quantity) of the foaming agent.
15.2.2 Satellite navigation system
If the sprayer is equipped with a satellite guidance system, follow the instructions provided.
15.3 Filling aerial filter
The filling aerial filter serves to filter the filling liquid and capture coarse mechanical debris, plant
debris, and other unwanted material. The filter is composed of three basic parts – the outer case,
the cover, and the filter itself (insert). Any parts of the filter that come into contact with the
pumped liquid are protected against corrosion.
Specifications
Type:
Stainless steel aerial filter Agrio 500
Volume: 18 l
Weight: 4.5 Kg
Diameter: ø 230 mm
Length: 615 mm
Connection: Fire terminal B,C
Max. pressure: 2.5 bar
Removable insert: ø 2 mm, ø 1.5 mm, ø 1 mm, ø 0.5 mm