Agrio ALKA 2500, Instructions For Use Manual

Page: 55 / 104

www.agrio.cz
info@agrio.cz 55
13.6.2.2
Manually folding and unfolding the booms with the locking pin
Manually folding
-
Support the opposite side of the boom.
- Release the locking pin upwards.
- Close the center boom and secure it with the locking pin.
Manually unfolding with the locking pin.
-
Support the opposite side of the boom
- Release the locking pin upwards.
- Open the center boom and secure it with the locking pin.
Attention!
When folding the booms in a single working run, the center boom must be unfolded
and secured by the locking pin in the horizontal position, otherwise the boom may be
damaged!
13.6.2.3
Folding and unfolding the booms using double folding (optional equipment)
- Procedure for unfolding the booms to a shortened span:
- Lift the booms into the upper position.
- Unfold the booms to their entire working span.
- Fold the outer booms to a shortened span.
- Manually secure the booms with clips!
Attention! Unsecured booms may be damaged!
-
Procedure for completely folding the booms:
- Lift the booms into the upper position.
- Unfold the booms to their entire working span.
- Fold the booms.
- Release the booms to their supports.
Attention! Folding the booms any other way may result in their damage!
14 Axles
14.1 ADR rigid extendable axle
The ADR axle is designed for chassis of for which the individual axle loads do not exceed 10 tons
at a maximum speed of 40 km/h.
All axle versions are designed with an air-controlled braking unit.
The height of the control pressure must be indicated in the instructions of the final product, based
on the protocol which verified the eligibility of the final product for operation (normally 0.6
Mpa).