Agilent Technologies R Series Page 155 User Manual Download

Page: 155 / 220

121

Chapter 5: Maintenance and troubleshooting

BenchCel Microplate Handling Workstation R-Series User Guide

10. When are you finished making the changes, click

Apply and save

labware parameters.

Changing the
general settings

!! DAMAGE HAZARD !!

Be careful when changing the general

settings. Changes in this tab will affect existing protocols.

!! DAMAGE HAZARD !!

The changes are stored in the BenchCel

flash memory. The changes you make to the general settings will
take affect any time you are using this BenchCel device regardless
of profile, protocol file, or device file.

To change general settings:

In BenchCel Diagnostics, click the

General Settings

tab.

Click to save changes.

Click to display the General Settings tab.

Summary of Contents for R Series





























































































































































































































Search results

Summary of Contents for R Series

Reviews:

Related manuals for R Series

Brands by name

Popular brands

Agilent Technologies R Series, User Manual

Search results

Summary of Contents for R Series

Reviews:

Related manuals for R Series

Brands by name

Popular brands