Agilent Technologies R Series, User Manual

Page: 98 / 220

Chapter 3: Setting up the BenchCel Workstation
BenchCel Microplate Handling Workstation R-Series User Guide
64
8. If you selected a serial (COM) connection, select Use flow control to
stop the flow of data from the computer before it overruns the
device communication buffer. Velocity11 recommends that you
select this option to optimize communication over the serial
connection.
9. In the BenchCel Diagnostics dialog box, in the Teachpoint file area,
click one of the following:
a.
New.
Allows you to create a new teachpoint file. If you are setting
up the BenchCel Workstation for the first time, you need to
create a new teachpoint file. You will later add teachpoints to
this file.
When you click New, the Save As dialog box opens. Type a name
for the teachpoint file, and then click Save. By default, the
teachpoint file name is Teachpoints_<profilename>.xml, where
<profilename> is the name of the profile, and the file will be
saved in the following folder: C:\Program
Files\Velocity11\Settings.
b.
Select.
Allows you to select an existing teachpoint file. You load
a teachpoint file if you want to use an existing teachpoint file, or
if you want an existing profile to reference a different teachpoint
file.
When you click Select, the Select a Teachpoint File dialog box
opens. Locate and select the teachpoint file, and then click
Open.
Select if you are using a serial connection and you
have a previous version of the BenchCel device.