Agilent Technologies R Series User Manual Download Page 126

Page: 126 / 220

Chapter 5: Maintenance and troubleshooting

BenchCel Microplate Handling Workstation R-Series User Guide

Routine maintenance

About this topic

This topic provides recommendations for maintaining the BenchCel
device.

After every run

Make sure you:

❑

Immediately clean up spilled liquids.

❑

Check the

-axis tracks to make sure it is free of debris.

Monthly inspection
and maintenance

In general, practice good housekeeping by cleaning up spills and
routinely cleaning after using the BenchCel Workstation.

Every month, check the following:

❑

Robot gripper pins to make sure they are not too dull to grip the
microplates. If the pins have become dull, contact Velocity11
Technical Support to replace them.

-axis tracks

Check the pins on each robot gripper.

Robot head - side view

Summary of Contents for R Series





























































































































































































































Search results

Summary of Contents for R Series

Reviews:

Agilent Technologies R Series, User Manual, Page: 126 / 220

Search results

Summary of Contents for R Series

Reviews: