Agilent Technologies R Series, User Manual, Page: 40 / 220

Chapter 1: Introduction
BenchCel Microplate Handling Workstation R-Series User Guide
6
Back view
Robot grippers The structures inside the robot arms that close and open
to hold and release a microplate. Using the provided
software, you can adjust the distance between the
grippers to hold a microplate loosely or tightly.
Air pressure
regulator The knob that you turn to adjust the air pressure inside
the device. Compressed air is used to move components
inside the stacker heads. Each regulator controls the air
pressure to the two adjacent stacker heads. To access the
regulator, remove the circular cover.
Pendant The component that is part of the safety interlock circuit
that must be closed for the BenchCel device to operate.
Pressing the raised button on the pendant breaks the
safety circuit and disables the robot motors. Use this
method for emergencies only.
Feature Description
Robot grippers
Ai r -i n put fitti n g
Powe r switch
AC powe r e n t r y
Ethe rn et po r t
Se r ial po r t
Pe n da n t po r t