Agilent Technologies R Series, User Manual, Page: 53 / 220

19 Chapter 1: Introduction
BenchCel Microplate Handling Workstation R-Series User Guide
BenchCel ActiveX
control
Included with the BenchWorks software is the BenchCel ActiveX control
that allows the BenchCel Workstation to interact with any Velocity11 or
third-party lab automation system. For information about the BenchCel
ActiveX control, see “BenchCel ActiveX control” on page 137.
BenchCel
Diagnostics software
BenchCel Diagnostics is a component of the supplied BenchCel ActiveX
software. Accessed through the BenchWorks software, the BenchCel
Diagnostics software allows you to:
❑
Create and manage profiles . Profiles allow you to set up
communication between the selected BenchCel Workstation and
the controlling computer. You create profiles when you set up the
BenchCel Workstation. For setup information, see “Setup Workflow”
on page 50.
❑
Set and edit teachpoints . Teachpoints are locations that the BenchCel
robot will go to and from during a protocol run. You set teachpoints
when you set up the BenchCel Workstation. For setup information,
see “Setup Workflow” on page 50.