Agilent Technologies R Series, User Manual, Page: 97 / 220

63 Chapter 3: Setting up the BenchCel Workstation
BenchCel Microplate Handling Workstation R-Series User Guide
7. If you selected an Ethernet connection, click Find available device to
select the device to associate with the profile. In the Discovered
BioNet Devices dialog box that opens:
a. Select the correct Ethernet adaptor for the device connection. A
list of devices appear.
b. In the list of devices that appear, select the BenchCel device. If
you have multiple BenchCel Workstations on the network, use
the
MAC Address to identify the BenchCel device you want. To
successfully communicate with the BenchCel device, the device
must show
New or Matched in the Status column.
Note: To determine the MAC address, you can turn off all
other BenchCel devices so that only one is shown in the
Discovered BioNet Devices dialog box.
c. When you are finished, click
OK
to return to the BenchCel
Diagnostics dialog box.
Click to select Ethernet adaptor.