Agilent Technologies R Series, User Manual, Page: 114 / 220

Chapter 3: Setting up the BenchCel Workstation
BenchCel Microplate Handling Workstation R-Series User Guide
80
Locking the device
positions
After you finish setting the teachpoint and verified that it is accurate, you
can lock all the devices in their positions.
To lock the devices in their positions:
1. Tighten the BenchCel integration plate clamp screw using the 3-mm
hex wrench.
2. Check the teachpoints again.
Deleting teachpoints To delete a teachpoint:
1. In BenchCel Diagnostics Profile tab, verify that the correct teachpoint
file is loaded.
2. In the graphical display area, double-click the teachpoint marker
that represents the teachpoint you want to delete. The
Teachpoint
Details dialog box opens.
3. Click Delete. The current teachpoint file will automatically be
updated when you delete a teachpoint.
4. Save the device file.
Related topics
Tighten the screw to lock
the devices in position.
For information about See...
Setup procedure “Setup Workflow” on page 50
Integrating external devices “Integrating the devices” on page 35
Moving between teachpoints “Diagnostic tools” on page 105