Agilent Technologies R Series, User Manual

Page: 66 / 220

Chapter 2: Unpacking and installing the workstation
BenchCel Microplate Handling Workstation R-Series User Guide
32
Unpacking and inspecting the BenchCel device
About this topic
This topic explains how to unpack the BenchCel device and lists the
items that are included with the device.
Unpacking
precautions
When unpacking the BenchCel device, be sure to:
❑
Note the dimensions of the shipping container before moving it to
make sure you have adequate clearance through doorways and
passages.
❑
Make sure the final location is nearby and easily accessible.
❑
Use care when lifting the BenchCel device to prevent personal injury
and damage to the device. Depending on the configuration, the
BenchCel device weighs 21.8
kg (48.1 lb) to 32.7 kg (72.1 lb) and
requires two people to lift it.
Unpacking the
BenchCel
Workstation To unpack the BenchCel device:
1. Open the BenchCel device shipping container.
2. Lift the contents out of the container and set each item carefully on
the lab bench or final location where you want to install the device.
3. Remove packing foams from the device.
4. Remove components from the plastic bags or other packing
material.
!! DAMAGE HAZARD !! Save the packing materials and shipping
container in case you need to move or ship the BenchCel device.
!! DAMAGE HAZARD !!
The packing materials and shipping
container were designed to protect the device. Packing the
BenchCel device using other materials might damage the device and
void your warranty.