Agilent Technologies InfiniiVision 6000 Series, User Manual, Page: 69 / 368

Front-Panel Controls 2
6000 Series Oscilloscope User’s Guide 69
Front Panel Controls
1. Power Switch
Press once to switch power on; press again to
switch power off. See page 33 .
2. Intensity Control
Rotate clockwise to increase analog
waveform intensity; counterclockwise to decrease. You can vary
the intensity control to bring out signal detail, much like an
analog oscilloscope. Digital channel waveform intensity is not
adjustable. More details about using the Intensity control to
view signal detail are on
page 263 .
3. USB Host Port
Connect a USB compliant mass storage device
to store or recall oscilloscope setup files or waveforms. You can
also use the USB port to update the oscilloscope’s system
software or Quick Help language files if updates are available.
You do not need to take special precautions before removing the
USB mass storage device from the oscilloscope (you do not need
to “eject” it). Simply unplug the USB mass storage device from
the oscilloscope when the file operation is complete. More
information on using the USB port is given in
Chapter 7 , “Saving
and Printing Data,” starting on page 315.
4. Probe Compensation Terminals
Use the signal at these
terminals to match each probe’s characteristics to the
oscilloscope channel to which it is connected. See
page 54 .
5. Digital Channel Controls
These controls switch the digital
channels on/off, and can be used to select a digital channel for
repositioning on the display. You can press the D15 Thru D0 key
to show the Digital Channel Menu above the softkeys. See
Chapter 3 , “Viewing and Measuring Digital Signals,” starting on
page 111.
C A U T I O N
Only connect USB devices to the USB host port. Do not attempt to
connect a host computer to this port to control the oscilloscope. Use
the USB device port if you want to connect a host (See the
InfiniiVision
6000 Series Oscilloscope Programmer’s Quick Start Guide for details).