Agilent Technologies InfiniiVision 6000 Series, User Manual, Page: 38 / 368

38 6000 Series Oscilloscope User’s Guide
1 Getting Started
The remote interface
You can communicate with all InfiniiVision 6000 Series
oscilloscopes via LAN, USB, or GPIB. 6000A Series
oscilloscopes can also be controlled using the front panel keys.
The 6000L Series oscilloscopes do not have a keyboard or
display, so communication must be established via LAN, USB,
or GPIB.
The Automation Ready CD-ROM provided with the oscilloscope
contains connectivity software to enable communication over
these interfaces. Refer to the instructions provided on the
CD-ROM to install this software on your PC.
Remote commands can be issued via LAN, USB, or GPIB. These
commands are generally used when the oscilloscope is under
program control for automated test and data acquisition.
Information about controlling the oscilloscope through remote
commands is contained in the
Programmer’s Quick Start
Guide , which is included in the documentation CD-ROM
supplied with this oscilloscope. You can also access this
document online: direct your web browser to
www.agilent.com/find/mso6000 and select Technical Support,
then select Manuals.
All 6000 Series oscilloscopes feature a built-in Web server
(requires software version 4.0 or greater; see
page 334 for
software updating instructions). Using the Web browser you can
set up measurements, monitor waveforms, capture screen
images and operate the oscilloscope remotely.
Detailed Connectivity Information
For detailed connectivity information, refer to the Agilent Technologies
USB/LAN/GPIB Interfaces Connectivity Guide . For a printable electronic copy of
the Connectivity Guide, direct your Web browser to www.agilent.com and search
for Connectivity Guide.