Agilent Technologies InfiniiVision 6000 Series, User Manual, Page: 11 / 368

Contents
6000 Series Oscilloscope User’s Guide 11
6000A Series Front-Panel Operation 76
To adjust the waveform intensity 76
To adjust the display grid (graticule) intensity 76
To start and stop an acquisition 77
To make a single acquisition 78
To pan and zoom 79
Choosing Auto trigger mode or Normal trigger mode 80
Using AutoScale 80
To set the probe attenuation factor 81
Using the analog channels 83
To set up the Horizontal time base 88
To make cursor measurements 95
To make automatic measurements 96
Using Labels 97
To print the display 101
To set the clock 102
To set up the screen saver 103
To set the waveform expansion reference point 104
To perform service functions 105
User Calibration 105
Self Test 108
About Oscilloscope 108
To restore the oscilloscope to its default configuration 110
3 Viewing and Measuring Digital Signals 111
To connect the digital probes to the circuit under test 112
Use only Agilent digital probe cable 112
Acquiring waveforms using the digital channels 115
To display digital channels using AutoScale 116
Example 116