Agilent Technologies InfiniiVision 6000 Series, User Manual, Page: 321 / 368

Saving and Printing Data 7
6000 Series Oscilloscope User’s Guide 321
Selecting a destination for your saved data
Press
Save/Recall
→
Save
to access the Save menu and select a
destination for saving your data.
Press to go/Location/Save to softkey
(Using the oscilloscope’s File Explorer)
The second softkey from the left in the Save menu is the file
explorer softkey.
If no USB storage device is connected to the oscilloscope, you
will only be able to save Trace and Setup files to the
oscilloscope’s internal memory. You will not be able to save
display image files or waveform data files as described on
page 324 unless a USB storage device is connected.
Rotate the Entry knob to align the selection arrow with “ C: ” and
push the
Press to go
softkey to select the destination. Then rotate
the Entry knob to align the arrow with the “ setups ” directory
and press the Save to softkey to select a file ( intern_n ) to be
overwritten.
N O T E
The File Explorer in the Save and Recall menus can be used to save the
following file types: oscilloscope setup, waveform trace, display image and
waveform data. It can be used to recall oscilloscope setup and waveform
trace files.
The File Explorer in the Utility menu can be used for loading files into the
oscilloscope or deleting files.