manualshive.com logo in svg

Agilent Technologies InfiniiVision 6000 Series, User Manual, Page: 261 / 368

Share
Download
Agilent Technologies InfiniiVision 6000 Series User Manual Download Page 261

Displaying Data

6

6000 Series Oscilloscope User’s Guide

261

Display Settings

•

Press the 

Display

 key to view the Display menu.

To manually control Display settings on 6000L models start the 
Remote Front Panel (see 

page 44

) and select 

Waveform

 from the 

Main Menu or press ctrl+W to access the oscilloscope’s Display 
Menu.

Infinite persistence

With infinite persistence, the oscilloscope updates the display 
with new acquisitions, but does not erase the results of previous 
acquisitions. All previous acquisitions are displayed in gray 
with reduced intensity, New acquisitions are shown in normal 
color with normal intensity. Waveform persistence is not kept 
beyond the display area boundary.

Use infinite persistence to measure noise and jitter, to see the 
worst-case extremes of varying waveforms, to look for timing 
violations, or to capture events that occur infrequently. 

To use infinite persistence to display multiple repetitive events

1

Connect a signal to the oscilloscope.

2

Press the 

Display

 key, then press 

∞ 

Persist

 to turn on infinite 

persistence. The display will begin accumulating multiple 
acquisitions. The accumulated waveforms are shown in gray 
with reduced intensity.

3

Press the 

Clear Display

 softkey to erase previous acquisitions.

The oscilloscope will again start to accumulate acquisitions.

4

Turn off infinite persistence, then press the 

Clear Display

 key 

to return the oscilloscope to the normal display mode.

Summary of Contents for InfiniiVision 6000 Series

















































































































































































































































































































































































Reviews:

No comments