Agilent Technologies AuroraPresto, User Manual

Page: 39 / 266

Section 1 - Preparing to Use
Aurora Presto
Issue 7 - 05/02 2-9
-2-
Turn the cover over to show the belt hook release
mechanism. The hook is held in place by a small bolt.
-3-
Remove the bolt from its holder. To do this:
• Release the bolt by pushing it upwards.
• Slide the bolt out of its holder.
-4-
Remove the belt hook from the top of the cover.
-5-
Replace the bolt in its holder by sliding it back in and
pushing down to secure it in place.
Warning: Belt hook bolt
Always keep the bolt in its holder. If you lose it you will not
be able to replace the belt hook, and the case will not be
water-resistant.
-6-
Replace the battery pack cover:
• Slide the cover back down into place.
• Push the screw down and turn it clockwise to
tighten.
Warning: Tightening the screw
Make sure the screw is tight enough to avoid the cover
coming off when you try to hang up
Aurora Presto
from its
belt hook.
481801-7.book Page 9 Thursday, May 23, 2002 10:46 AM