Agilent Technologies AuroraPresto, User Manual

Page: 66 / 266

Aurora Presto
—User Guide
3-18 481801
DGW
This displays the Default Gateway
from the WAN setup.
Msk
Use to enter the LAN IP Mask. The IP
Mask separates the network address
from the host address.
DNS
This displays the Domain Name
Server IP address from the WAN
setup.
Entering the Source IP address, Mask IP
address
-1-
Select
Adr
or
Msk
from the
LAN Address
screen. A
screen similar to the following is displayed.
-2-
Enter the required value.
The dot is entered automatically. You can enter a new
number or accept the current setting.
-3-
Press ENTER .
Note
The above options consist of 4 groups of 3 digits divided by
a dot. The maximum number you can enter in each group
is 255.
-4-
Press F4
Setup
to return to the
Main Setup
screen.
Note
The above options consist of 4 groups of 3 digits. The
maximum number you can enter in each group is 255.
Setting up the WAN Address
This option is used to set up
Aurora Presto
’s address on the
WAN (ADSL) side of the network.
This option is only available if you have set up the
IP Mode
to
Routed.
481801-7.book Page 18 Thursday, May 23, 2002 10:46 AM