Agilent Technologies AuroraPresto, User Manual

Page: 45 / 266

Section 3 - Basic Operations
Issue 7 - 05/02 2-15
3
Basic Operations
This section is intended for beginners, and explains some
simple operations that you are likely to perform frequently
while using your
Aurora Presto
. You will learn how to:
• adjust the volume of the loudspeaker
• select an interface for testing
• choose the operating mode
• enter alphanumeric information (e.g. names to
identify stored test results).
Adjusting the Volume
To switch the loudspeaker on or off, press the key located
on the right-hand side above the screen. The default is on.
Note
When you switch the loudspeaker on, the last entered
volume setting is used.
You can change the volume of the loudspeaker.
To adjust the volume:
-1-
Press + 3 .
Aurora Presto
displays a bar graph
indicating the current volume.
-2-
Change the volume to the level you require. To
increase by one step, press or . To decrease by
one step, press or .
3
Section
481801-7.book Page 15 Thursday, May 23, 2002 10:46 AM