Agilent Technologies AuroraPresto, User Manual

Page: 146 / 266

Aurora Presto
—User Guide
4-46 481801
•
Rx SNM
—The Received Signal-to-Noise Margin
in dBs. This is updated every second. If the link
is not active ‘
0
’ is displayed.
•
Rx Gain
—The Receiver Gain in dBs. This is
updated when the line is activated.
•
Atten.
—The Loop Attenuation. This is updated
every second. If the link is not active ‘
0
’ is
displayed.
-4-
Choose F1
Next
to display the next statistics screen.
Far End Statistics
•
Rx Gain
—The Receiver Gain in dBs. This is
updated when the line is activated.
•
Atten.
—The Loop Attenuation. This is updated
every second. If the link is not active ‘
0
’ is
displayed.
Near End Errors
This displays the number of Near End segment error counts
that have occurred on the local segment between
Aurora Presto
and the next segment terminator in the link.
The errors displayed are:
•
CRC
—Displays the Cyclic Redundancy Check
errors detected during the session.
•
LOSW
—Displays the Loss of Sync Word defect
errors during the detected during the session.
-5-
Choose F1
Next
to display the next statistics screen
OR
press
F3
Clear
to set the counts to zero.
Far End Errors
•
CRC
—Displays the Cyclic Redundancy Check
errors detected during the session.
-6-
Choose F1
Next
to display the next statistics screen.
481801-7.book Page 46 Thursday, May 23, 2002 10:46 AM